|
|
Post by Ralf Maylin on Apr 7, 2007 4:05:05 GMT -5
I'm working on the LTU L1011, body and rudder are painter but I still have two grey triangles, marked in green. I paste a screeny of the bitmap too for reference. Help would be very much appreciated. Ralf   |
|
|
|
Post by Ralf Maylin on Apr 7, 2007 5:51:52 GMT -5
Well, the funniest questions are those that you can answer yourself. I coloured the complete bitmap red and the triangles are still grey, so I assume that they are not mapped. I will paint all pixels that are not needed for the mapping in red, should there be once a model update, the repaint will still be useful.
Ralf
|
|
|
|
Post by sunking on Apr 7, 2007 7:20:36 GMT -5
Have you tried the box, bellow the Engine Fan and between the Horizontal Stab and the Wing??? It looks to me, like that would be the missing part. Just a suggestion.
Regards.
-STEFAN-SUN_KING-
|
|
|
|
Post by Ralf Maylin on Apr 7, 2007 7:44:29 GMT -5
Yes, I tried it but that box goes to "nowhere". If I paint the complete bitmap, I still see no clour at this aerea. I'll check if I have the latest model installed.
Ralf
|
|
|
|
Post by chrisP on Apr 7, 2007 8:45:55 GMT -5
According to ACM, here's the actual polygon mapping:  I checked on other repaints and the "white twins" are also there  |
|
|
|
Post by Christian Page, RAI on Apr 7, 2007 21:39:33 GMT -5
This belongs more in the Technical Questions area. I'm not jumping on you, Ralf, or anyone - else - I am every bit as guilty of this. Let's try to keep things in the closest associated area, as those who may have the answers could be lurking in the other groups and not here. CC: ing fine, I'm all for that! I'll bet that every question one of us asks, at least another is - and the one with the answer could be looking elsewhere. I check all three - and I hope all regulars do - but you never know.
|
|
|
|
Post by Ralf Maylin on Apr 8, 2007 12:21:52 GMT -5
You are right, Kris, any chance of moving the post to the technical forum?
Ralf
|
|
|
|
Post by Dee Waldron - HJG on Apr 8, 2007 22:19:14 GMT -5
Well... what daya know! Just when you thought ya had it all figgered out. Its back to the drawing board.  Tonight after I get home, I'll dig it outta of the Zip file and see about this problem. So... a new update to the Tristar model is pending.  Dee |
|
|
|
Post by Ralf Maylin on Apr 10, 2007 6:10:43 GMT -5
Hi Dee,
very much appreciated, many thanks.
Ralf
|
|
