|
|
Post by klm617 on Feb 25, 2007 11:14:55 GMT -5
Clearance delivery and ground are on the same frequency how do I correct this so they will be on different frequencies as this causes problems with traffic. Next question how do I force departures from runway 18 as I think I can get better traffic flow this way without inbound flight crossing the departure runway and being held up Maybe there is some kind of weather setting I can use to force runway 18 departures. Any help is appreciated
|
|
|
|
Post by chrisP on Feb 25, 2007 11:37:39 GMT -5
|
|
|
|
Post by klm617 on Feb 27, 2007 20:44:25 GMT -5
OK I have doine what you suggested but FS9 is overiding the closed runway there has to be a way to force take offs from runway 18. I have a Afcad for FS2002 that all departures are from runway 18 and it works great take offs do not interfier with landing traffice and the flow is very good. If its one thing I can not stand its an aircraft dissapearing because it has to wait so long to move.
|
|
|
|
Post by chrisP on Feb 27, 2007 21:05:52 GMT -5
If there's an override, that's probably bcz you're using an add-on scenery. You can assign your AFCAD (it's probably in Addon Scenery/Scenery) a higher priority (rank) with the scenery manager and make it load on top of the addon..
|
|
|
|
Post by tgibson on Feb 28, 2007 13:17:35 GMT -5
Hi,
Runways have to be within 7 degrees of runway 18 to be considered parallel (and thus closeable). If they are greater than that, then FS will override your closure, depending on wind direction.
Hope this helps,
|
|
|
|
Post by klm617 on Mar 3, 2007 13:21:44 GMT -5
Well I was able to force runway 18 Departures buy putting a heavy south wind in. But now we have the next problem. Landings are now being done on runway 18 and I need to have landing traffic on runway 25 or 7 is there a fix for this
|
|
|
|
Post by chrisP on Mar 4, 2007 8:00:15 GMT -5
Are you using any particular add-on or are we talking about the stock EDDF?
|
|
|
|
Post by klm617 on Mar 4, 2007 11:10:05 GMT -5
I am using a Afcad I downloaded from AVSIM.
|
|
|
|
Post by chrisP as guest on Mar 4, 2007 11:40:07 GMT -5
I was talking about the scenery, not the afcad
|
|
|
|
Post by klm617 on Mar 4, 2007 12:13:42 GMT -5
default scenery no add on
|
|
|
|
Post by chrisP as guest on Mar 4, 2007 12:21:25 GMT -5
there might be another way. I'll check on it tonight and let you know (I'm not at home right now, as you can see by the "guest").
|
|
|
|
Post by chrisP on Mar 4, 2007 20:40:14 GMT -5
Aha!! I knew I had seen it somewhere before!
In short (and that fits in nicely with Tom's point about the rwy heading differences), the trick is to make fake closed runways with headings compatible with your infamous rw18...
In much plainer English, see that thread/tutorial from PAI:
[http]http://www.projectai.com/discuss/index.php?PHPSESSID=8a2612d6adff18243cdc7b4e336d8933&topic=20325.0[/http]
That's how I activated 10/28 at CYUL.
Exit runway (18) when able
Christian
|
|
