|
Post by klm617 on Jul 29, 2006 18:53:24 GMT -5
The problem is the AI Aarvark 747s do not show up at JFK in FS2002 I have tried 2 othe AFCAD files for JFK and the same happens. Does anyone know how to slove this problem or have a AFCAD for FS2002 where the 747s will show up.
Thanks from the KLM 617 heavy
|
|
|
Post by klm617 on Aug 20, 2006 19:35:06 GMT -5
Well the 747's show up at all the other airports except JFK. How do you correct a parking radius problem. I tried changing the air file to a much smaller aircraft but that still does not get it. Also the 747 lands and then disappears. I am thinking it is a problem with the Afcad as the planes do not disappear at other airports.
|
|
|
Post by klm617 on Jun 25, 2007 19:45:31 GMT -5
Just wanted to know if anyone has any answers for this problem it only accrues in FS2002 the AIA 747 will land and then when it exits runway disappears even tho there is ample parking spaces. I am looking for a AFCAD for JFK FS2002 that will correct this problem.
|
|
|
Post by Ralf on Jun 30, 2007 6:01:21 GMT -5
I would open the AFCAD file using AFCAD and change the radius of a few parking spots. (Check if there's space enough between them, maybe you have to delete a few between them). If I remember right, the 747 radius should be set to 43 meters. You could check/correct that by using AFCAD's aircraft editor feature.
|
|
|
Post by chrisP on Jun 30, 2007 6:47:37 GMT -5
Are the 747 spots set apart from the rest? If so, check with AFCAD that there is a connecting taxiway from there to the runway
|
|