|
Post by biggiraffe on Jun 15, 2006 16:51:53 GMT -5
Hello,
This is a bit baffling, but for the first time I've placed myself at an airport to look for Air France Caravelles, and I can't make them appear, AI, at all. I can call the aircraft up on the selection menu just fine. And all the other Air France aircraft are showing up when they're supposed to - just no Caravelle's.
Any suggestions? Thanks, Kurt
|
|
|
Post by jetstar on Jun 15, 2006 17:58:54 GMT -5
Hi Kurt.
The first thing to check is that the name in the aircraft config file matches with the aircraft name in the aircraft.txt of the flight plan.
I know you have probably checked it already but please check it again.
It might be something as stupid as a space in the aircraft.txt file. I know as I have done that myself and it can be very hard to see.
AC#1,250,"Air France Caravelle" could be:-
AC#1,250," Air France Caravelle" or AC#1,250,"Air France Caravelle"
Failing that check that the AC# is correct. If you still can't get it to work say so here, and I'll PM you my email address so you can send me the flight plans and model and I'll look into it for you.
Paul
|
|
|
Post by biggiraffe on Jun 15, 2006 18:43:54 GMT -5
Hi Paul,
I copied the aircraft name from the config file.... and it works fine now. I must have had an extra space, as you said. Anyway, now that I see the plane is working and looks good, I'll go ahead and post it on AVSIM.
Thank you very much! Best regards, Kurt
|
|
|
Post by jetstar on Jun 16, 2006 1:34:55 GMT -5
Hi Kurt.
Glad I could help.
Paul
|
|