|
Post by laetus on Mar 16, 2020 11:01:01 GMT -5
Trying to see if there are any non dds repaints out there for an Air Jamaica a310 and a300, as well as an md80 and shorts 360 in the colorful late 90's livery, any help would be appreciated
|
|
|
Post by cgold on Mar 16, 2020 13:24:43 GMT -5
Welcome laetus to RetroAI! funk has done some AJM 90's textures for some of those aircraft. I may have some of those covered in my Box.com account link in my signature. The Shorts 360 and the BN-2 are not done just yet but there is a Dornier 228 and a Dash-8 done.
|
|
|
Post by laetus on Mar 21, 2020 20:09:54 GMT -5
thank you! was able to find the 727 and do-227, but still on the search for the a300/310 and md80
|
|
|
Post by chasensfo on Mar 22, 2020 4:40:46 GMT -5
thank you! was able to find the 727 and do-227, but still on the search for the a300/310 and md80 My PC isn't hooked up yet after a move, but once it is, I will send you these textures if you do not find them first. I have the A310 and MD-80, not 100% sure if the A300 was done.
|
|
|
Post by cgold on Mar 22, 2020 5:41:07 GMT -5
It was - I’ll email them over to you here in a little while.
|
|
|
Post by laetus on Mar 22, 2020 18:03:50 GMT -5
I would really appreciate that I haven't been able to find them anywhere and would really like to complete the fleet
|
|
|
Post by wernerw on Mar 23, 2020 1:42:27 GMT -5
Take the A310 from Jürgen Baumbusch's site to be found under "retro". You just have to convert the textures to bmp.
|
|
|
Post by laetus on Mar 25, 2020 19:11:30 GMT -5
any suggestions on how to do the conversion? I downloaded something called DXTBmp but have not been able to figure it out
|
|
|
Post by wernerw on Mar 26, 2020 2:18:26 GMT -5
You need DXTbmp and nconvert. Click on the textures you want to convert and run nconvert. Then run DXTbmp, select in the aircraft menue your relevant textures and don't forget to assign an alpha channel (can be done automatically), then save and your textures are usable in FS2004. I'm really no expert in any computing business, but I learned it quickly.
|
|
|
Post by chasensfo on Mar 26, 2020 3:25:51 GMT -5
You need DXTbmp and nconvert. Click on the textures you want to convert and run nconvert. Then run DXTbmp, select in the aircraft menue your relevant textures and don't forget to assign an alpha channel (can be done automatically), then save and your textures are usable in FS2004. I'm really no expert in any computing business, but I learned it quickly. Correct, but do not forget to flip the texture! DDS files are upside down, .bmp textures are right side up. So select "FLIP IMAGE AND ALPHA", then save as "extended bitmap", done in about 20 seconds.
|
|
|
Post by laetus on Mar 28, 2020 10:09:31 GMT -5
that did the trick thank you now one step closer to completing the fleet!
|
|
|
Post by cgold on Mar 28, 2020 11:12:21 GMT -5
I apologize, laetus. I’m headed off on a “temporary” deployment to MIA for Amerijet. I’ll email you the Air Jamaica fleet when I get set up down there.
|
|