Post by chasensfo on Jul 28, 2019 5:42:18 GMT -5
Hey there guys,
Recently a nice scenery came out for ENFB. However, the ADEX was very crappy, missing probably 80% of the airport parking and with most of the taxiways unnamed and/or missing(along with proper signage). Using airport diagrams I found online and photos, I was able to make 2 versions of the scenery. One is for the late 1980s into the early 1990s, and the other for the late 1990s up until the 1998 closure. The late 1990s version calls for a satellite terminal used by the smaller SAS DC-9s and many of the commuter carriers, however, that area has been covered with a section of forest trees between taxiways in the original scenery. There are many separate .bgls in the scenery folder each containing a different cluster of trees. Is there a good way to be able to check the geographical placement of a specific file so that I know which files need to be turned "off" for the late 1990s scenery?
Also, there are 2 other issues, the first being motor traffic driving across the airport(which I suppose is now a motorway). Short of disabling vehicle traffic when flying in/out of ENFB, is there a way to get rid of these roads? And the developer dropped the jetbridges into odd spots, so while DC-10s and A310s and the like were able to use all of the main terminal gates in real life, the placement of the bridges means widebody jets overlap between gates. Is there a way I can spread the jetbridges further apart possibly?
Here is the stock ADEX for the airport compared to my early and late 1990s versions. In the late 1990s version, the problems are visualized well in the screenshot:
Stock ADEX:
My early 1990s:
My late 1990s(note the wingspan issues on terminal, road traffic, and trees in right corner)
Any help much appreciated, I would love to get my fix-up of this airport uploaded to Avsim/Flightsim for all of you!(Well, for the P3Dv4 users as I don't think it works with FS9/FSX).
Recently a nice scenery came out for ENFB. However, the ADEX was very crappy, missing probably 80% of the airport parking and with most of the taxiways unnamed and/or missing(along with proper signage). Using airport diagrams I found online and photos, I was able to make 2 versions of the scenery. One is for the late 1980s into the early 1990s, and the other for the late 1990s up until the 1998 closure. The late 1990s version calls for a satellite terminal used by the smaller SAS DC-9s and many of the commuter carriers, however, that area has been covered with a section of forest trees between taxiways in the original scenery. There are many separate .bgls in the scenery folder each containing a different cluster of trees. Is there a good way to be able to check the geographical placement of a specific file so that I know which files need to be turned "off" for the late 1990s scenery?
Also, there are 2 other issues, the first being motor traffic driving across the airport(which I suppose is now a motorway). Short of disabling vehicle traffic when flying in/out of ENFB, is there a way to get rid of these roads? And the developer dropped the jetbridges into odd spots, so while DC-10s and A310s and the like were able to use all of the main terminal gates in real life, the placement of the bridges means widebody jets overlap between gates. Is there a way I can spread the jetbridges further apart possibly?
Here is the stock ADEX for the airport compared to my early and late 1990s versions. In the late 1990s version, the problems are visualized well in the screenshot:
Stock ADEX:
My early 1990s:
My late 1990s(note the wingspan issues on terminal, road traffic, and trees in right corner)
Any help much appreciated, I would love to get my fix-up of this airport uploaded to Avsim/Flightsim for all of you!(Well, for the P3Dv4 users as I don't think it works with FS9/FSX).