|
Post by hansswe on Jul 3, 2017 14:51:14 GMT -5
Hello, I have seen most of my PAIF50 taxi around like there is no taxiways or runways. When they get the cleared for taxi after they land or will takeoff the aircraft just drive around the airport even outside at a very slow speed. I use FSX:se and the version of the AI is PAIF50V6. Can it be something with the model or aircraft file?
Thank you. Regards Hans
|
|
|
Post by chrisP on Jul 3, 2017 21:48:41 GMT -5
Hello Hans,
Does it happen with all airports or just the one?
Exit runway when able
Christian
|
|
|
Post by hansswe on Jul 4, 2017 2:53:53 GMT -5
Yes, all the airports there i have F-50. When i notice it was with SAS at EKCH and then at ESGG, and then the rest.
|
|
|
Post by tgibson on Jul 10, 2017 12:47:48 GMT -5
Does the plane seem to turn very slowly? If so, the problem is probably in the contact points section of the aircraft.cfg file. Check the steering angle of the nose wheel, and increase it if necessary. Look at the contact points of the default 737 to find which number is the steering angle. The nose gear will be the gear line with a lateral displacement of zero.
|
|
|
Post by hansswe on Jul 12, 2017 4:16:26 GMT -5
Not sure what it is, after they landed they turn off the runway and taxi straightforward to the ramp/parking through buildings etc, same when they will takeoff but they never go to the runway, just a slow taxi. Very strange, all other AI follow the taxiways. I have tried to post some image but get some error.
|
|