|
Post by klm617 on Feb 17, 2013 22:46:37 GMT -5
Never had this issue but flying from FRA to LHR just shortly after taking of from FRA my flightsim crashes and I get an error that says windows is closing the programm. Any ideas
|
|
d
Second Officer
Posts: 189
|
Post by d on Feb 18, 2013 1:20:59 GMT -5
When this happens to me its because I am near an AI plane with the textures saved in the wrong format. Or it could be a spelling error in one of the texture file names for an AI. I usually start by disabling my traffic files to see if this is really the cause. Then I'll start adding the airlines back in 50% percent at a time until I find the culprit. Key to all this is replicating the error so you can troubleshoot it consistently.
I can usually find my party crasher AI plane quickly in my retro AI world but my present day flightsim setup has over 1500 traffic files that I have to check. Its no fun flying for two hours and then having your sim crash when your on final for your destination airport!
Best regards...Duncan
|
|
|
Post by tgibson on Feb 18, 2013 13:33:19 GMT -5
Yes, first disable AI traffic, then see if this stops the crashes. Then use the above procedure to find the culprit.
If it doesn't stop the crashes, try disabling addon sceneries in the Scenery Library and see if that fixes it. If so, use a similar procedure to find the bad scenery layer.
Hope this helps,
|
|
|
Post by klm617 on Feb 18, 2013 18:04:37 GMT -5
Its is really strange because if you follow the aircraft from the tower view it will fly throught with now problem if you pick it up on the other side of where the crash accurs now problem the only time the crash accures is when you are following the plane with traffic view board and you have you view on the aircraft itself thats when the crash accures everytime at it is just out of the Frankfurt area to the north.
|
|
|
Post by klm617 on Feb 18, 2013 21:48:37 GMT -5
Sad to say it crashes with no traffic and I have no add-on scenery.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 19, 2013 9:25:56 GMT -5
Its is really strange because if you follow the aircraft from the tower view it will fly throught with now problem if you pick it up on the other side of where the crash accurs now problem the only time the crash accures is when you are following the plane with traffic view board and you have you view on the aircraft itself thats when the crash accures everytime at it is just out of the Frankfurt area to the north. What?
|
|
|
Post by klm617 on Feb 19, 2013 19:41:48 GMT -5
probibly going to have to reinstall. removed everything in the crash area and it still keeps crashing.
|
|
|
Post by klm617 on Feb 21, 2013 18:26:30 GMT -5
reinstalled the prgramm and still get the same FS9 crash any ideas
|
|
|
Post by klm617 on Feb 21, 2013 22:43:36 GMT -5
It appears that traffic view board is crashing my sim has anyone else had this issue.
|
|
|
Post by tgibson on Feb 22, 2013 16:45:15 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 23, 2013 4:06:45 GMT -5
I have had the same problem FS9 freezes,ticked the box as Mr Gibson advises and no more problems.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 25, 2013 8:41:21 GMT -5
Further to my above message,I have also found a problem useing scenery in a flight pack by another person than supplied with the flight pack can cause the same problem at times.I used scenery by Scotflight for RAF Lossiemouth instead of the scenery by UKMil and had the same problem.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 26, 2013 14:34:27 GMT -5
Another problem,I installed ACG RAF Marham 93 and did'nt use the Ai tornado's or the texture in the Tornado pack.Same result unless I went there at night when it works O.k.but daytime it did'nt load up.
|
|
|
Post by 747sp on May 5, 2013 14:53:51 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 6, 2013 11:27:43 GMT -5
This can also be due to insuffient virtual memory(Page file system) I have set mine about 4000M start 9000 end.
|
|