|
Post by klm617 on Aug 12, 2012 7:42:50 GMT -5
For some reason the lights do not work on the Evolve AI DC-10-10 that I have can anyone help me on how to get them to work.
|
|
|
Post by klm617 on Aug 16, 2012 19:13:32 GMT -5
Tried that an still can't get the lights to work.
|
|
|
Post by tgibson on Aug 17, 2012 14:30:30 GMT -5
Do all other planes work OK? If so, then it is indeed likely to be the [Lights] section of the plane's aircraft.cfg file at fault.
|
|
|
Post by klm617 on Aug 18, 2012 15:57:05 GMT -5
I am using FS9 and this is the light entries.
[lights]
light.0 = 3, -34.45, -78.25, -2, fx_Shockwave_navred light.1 = 3, -34.45, 78.25, -2, fx_Shockwave_navgre light.2 = 2, -35.16, -78.68, -2, fx_Shockwave_strobe_l light.3 = 2, -35.16, 78.68, -2, fx_Shockwave_strobe_l light.4 = 1, -17.65, 0, -11.9, fx_Shockwave_beacon_rotating_red light.5 = 1, 2.2, 0, 7.6, fx_Shockwave_beacon_rotating_red light.6 = 3, -44.81, -78.23, -2.07, fx_Shockwave_navwhi light.7 = 3, -44.81, 78.23, -2.03, fx_Shockwave_navwhi light.8 = 2, -44.97, -78.68, -2.02, fx_Shockwave_strobe_l light.9 = 2, -44.97, 78.68, -2.02, fx_Shockwave_strobe_l light.10 = 7, -88.5 , 0 , 11 , fx_nicksmokeAI_777_AB light.11 = 7, 0 , -27.8 , -11 , fx_nicksmokeAI_777_AB light.12 = 7, 0 , 27.8 , -11 , fx_nicksmokeAI_777_AB light.13 = 5, 69.8, 8.6, -5.2, fx_Shockwave_landing_light light.14 = 5, 69.8, -8.6, -5.2, fx_Shockwave_landing_light light.15 = 5, 24.5, 9.6, -6.1, fx_Shockwave_landing_light light.16 = 5, 24.5, -9.6, -6.1, fx_Shockwave_landing_light light.17 = 6, 63.5, 0.8, -12.5, fx_Shockwave_landing_light light.18 = 6, 63.5, -0.8, -12.5, fx_Shockwave_landing_light
|
|
|
Post by klm617 on Aug 19, 2012 8:30:48 GMT -5
That would be it Jason can you send me the correct default lights for this plane :-)
|
|
|
Post by tgibson on Aug 23, 2012 19:42:35 GMT -5
Those are not default light entries, those are for payware Shockwave lights. You will need to edit the Lights section to use the default lights. Refer to a default aircraft like the 737 for the names of the default lights and change those entries to match.
Hope this helps,
|
|
|
Post by klm617 on Aug 25, 2012 9:46:43 GMT -5
Thank you Tom that did the trick now I understand :-)
|
|
|
Post by eduardo85 on Aug 25, 2012 20:35:36 GMT -5
Is that the same model I sent you via e-mail??
If so, I forgot to point out regarding the lights. I will try to find to original file that has the codes for the default lights.
|
|
|
Post by klm617 on Aug 25, 2012 22:50:51 GMT -5
Thank You :-)
|
|
|
Post by eduardo85 on Aug 26, 2012 23:46:51 GMT -5
I think this should be it:
[lights]
light.0 = 3, -34.45, -78.25, -2, fx_navred light.1 = 3, -34.45, 78.25, -2, fx_navgre light.2 = 2, -35.16, -78.68, -2, fx_strobe light.3 = 2, -35.16, 78.68, -2, fx_strobe light.4 = 1, -17.65, 0, -11.9, fx_beaconh light.5 = 1, 2.2, 0, 7.6, fx_beaconh light.6 = 3, -44.81, -78.23, -2.07, fx_navwhi light.7 = 3, -44.81, 78.23, -2.03, fx_navwhi light.8 = 2, -44.97, -78.68, -2.02, fx_strobe light.9 = 2, -44.97, 78.68, -2.02, fx_strobe light.10 = 5, 24.26, -9.60, -6.10, fx_landing light.11 = 5, 24.26, 9.6, -6.1, fx_landing
|
|