|
Post by gudiano on May 30, 2012 10:03:37 GMT -5
Dear: I have two questions, probably the friends can help me: -) In my AI, I use Electra model by Dee Waldron, and they do not land at airports, just take off. They come near the airport and go straight, then disappear! Is to solve this? -) In some airports, some aircraft take off outside the lane. I've tried to arrange the AFCAD and had no success. Is to solve this?
|
|
|
Post by cgold on Jun 12, 2012 23:02:41 GMT -5
Pertaining to the Electra, the aircraft's behavior may be related to its approach to the airport... I've seen AI aircraft try to land too high and do what you describe... I'm not a big source on trying to fixing this, but there is no newer AI Electra just yet, so that'll be on hold for a while... The AFCAD problem sounds like the aircraft is trying to turn around at the end of a runway and it has no path to follow, so it just performs a default turn-around... usually resulting in an aircraft turning-around / lining-up off the runway... Try building an AFCAD taxiway path for the aircraft to follow and see if the plane stays on the pavement... Hope this helps!
|
|
|
Post by Dee Waldron - HJG on Jun 14, 2012 22:04:57 GMT -5
For the L188 model, throw away the AIR and CFG files and replace them with a copy of the default B-737 AIR and CFG files. You'll need to edit the contact points in the CFG file so the aircraft will sit on the ground correctly. You might be able to get more help on this over at Tom Gibson's California Classics website forum. Hope that's helpful. Cheers! Dee Waldron
|
|
|
Post by gudiano on Jun 19, 2012 11:59:20 GMT -5
Great. Problem solved! Thank you!
Eduardo 63
|
|