mh88
Gate Agent
Posts: 76
|
Post by mh88 on Jan 29, 2011 21:49:18 GMT -5
Hello everyone,
First of all, I'm new to this forum and I would like to thank everyone for their work and so we can have a great retro traffic for FS.
However, I have a serious problem with the AI traffic. The planes are in the airports, they take off, but after 3 minutes of flight, they disappear.
And because they disappear, they are no more aircraft which lands. This is a big gap when I'm spotting The Traffic.
Is it possible that someone has the answer to this problem?
I installed perfectly good airplanes and flight plans copied and then I compiled with MRAI.
Thank you in advance to all the community.
Marc
|
|
|
Post by tgibson on Jan 31, 2011 12:07:20 GMT -5
How are you following the AI plane that disappears after 3 minutes? If you are using Ctrl W or similar approach, the plane will only be in view if it is within 100 NM of *your* plane. Once it goes any further than this it will disappear. Also, planes that are landing will appear at around 100 NM away from the airport, and it takes a little while for those planes to get to the airport. Be patient. Hope this helps,
|
|
mh88
Gate Agent
Posts: 76
|
Post by mh88 on Jul 4, 2011 4:23:46 GMT -5
Hi! Thanks for your answer. I did nothing since January and now I'm in holiday, I begin to try again to make this working. Actually I'm following the AI plane and they dissapear. They dissapear very "quickly". For exemple, when I have the WOAI traffic on and i come into the sim, there already is planes in fly and they land, etc. But with my manualy installation they just take off. I put the 4x speed to see what happen and there is still nothing.
(sorry for my english)
Marc
|
|
mh88
Gate Agent
Posts: 76
|
Post by mh88 on Jul 4, 2011 7:58:14 GMT -5
Ok...I have solved the problem. I had 2 missing BGL in Scenery/world/scenery. That was bvcf.bgl and lak.bgl.
Marc
|
|